Skip to content
Tile, Town 'n' Country, FL

Tile in Town 'n' Country, FL

Tile is still the most water-proof surface you can put in a Florida bathroom, shower or entry, and porcelain in particular stands up to sand, pool traffic and decades of mopping. We install new porcelain and ceramic floors, shower walls and feature walls, often in the same home where we are pulling up old, cracked tile from a previous owner. We bring tile samples to your home with the rest of the showroom, so you can see colour and size against your own cabinets and light before you commit. Professionally installed across Town 'n' Country.

Tile installed in Town 'n' Country, FL by BR Flooring
Why BR Flooring in Town 'n' Country

Tile done right, the first time, in Town 'n' Country.

Homeowners across Town 'n' Country, FL call BR Flooring for tile because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install tile across Town 'n' Country and the surrounding area, including Westchase, Oldsmar, Carrollwood, Safety Harbor.

Tile in Town 'n' Country

Built for Town 'n' Country homes.

Town 'n' Country began in 1958, when the LaMonte-Shimberg Corporation bought a 525-acre dairy farm near Hillsborough Avenue and Memorial Highway and started one of Tampa's first suburban communities. By 1978 the same developers had built nearly 8,000 single-family homes and townhouses across more than 2,000 acres. Those slab homes are now well into their sixth decade, and most of them have had several floors over the years, which shapes almost every flooring job in Town 'n' Country, FL.

Before the 1950s this corner of western Hillsborough County was mostly natural land and cattle farms. In 1958 the LaMonte-Shimberg Corporation bought a 525-acre dairy farm from the Webb family and began building the Town 'n' Country Park subdivision. When they finished, the community covered more than 2,000 acres and stretched over three miles, from Memorial Highway north past Waters Avenue, with nearly 8,000 homes and townhouses built between 1958 and 1978. Today it also takes in neighbourhoods such as Bay Crest Park, Countryway, Rocky Creek and Sweetwater Creek, and the northwest part of Tampa International Airport.

A house built in the 1960s or 70s has usually seen a few rounds of flooring. When we open up a floor here we might find ceramic tile from one remodel, carpet from another, and old adhesive from whatever was first. It is also not unusual in homes of this era to find an older hard floor, such as terrazzo, under carpet. We do not restore those original floors, but we can tell you whether to remove them or install over them, and why.

The slab itself has had decades to settle. Before a new floating floor goes down, we check flatness with a long straightedge, grind high spots and fill low ones. Skipping that step is the most common reason new LVP or laminate starts clicking or separating at the joints.

Many Town 'n' Country homes are modest in size, which makes a single floor through the living areas, kitchen and halls a practical way to make them feel larger. We bring the samples to your home so you can see them against your own walls and cabinets, then handle removal, prep, installation and trim in one project.

Town 'n' Country FAQs

Tile in Town 'n' Country, questions

Our 1970s Town 'n' Country house has carpet over something hard. What do we do?

Sometimes that is tile, sometimes an older floor like terrazzo. We look during the estimate. Depending on what is there and how flat it is, we either remove it or prepare it and install the new floor over it. We do not restore terrazzo, but we will tell you if it is a better idea to keep it.

Will a new floor make our smaller home feel bigger?

Often it does. One continuous floor through the living areas, with no colour change at each doorway, makes rooms read as one space. Wider, longer planks help too.

Porcelain or ceramic tile: what is the difference?

Porcelain is denser and absorbs less water, which makes it the better choice for showers, entries and floors that see heavy traffic. Ceramic is softer and usually less expensive, and it is fine for many walls and lighter-use floors. We will tell you which one each room needs.

Can you install tile in a shower?

Yes. We tile shower walls, including patterned layouts such as herringbone. A shower is a wet system, not just tile, so the waterproofing behind the tile matters as much as what you see. We go over the build-up with you at the estimate.

Why do large tiles need such a flat floor?

Large-format tiles are stiff and cannot follow dips in the slab the way small tiles can. If the floor is not flat, edges stick up (called lippage) and tiles can sound hollow or crack. We level the slab before setting large tile so the finished floor is smooth and solid.

Do you fix cracked or loose tiles?

We usually avoid repair projects. Matching an old tile and grout rarely looks right, and it does not address why the tile cracked. If several areas are failing, replacing the floor in that room is often the better investment, and we would be glad to quote it.

Flexible financing available

0% interest for up to 24 months for qualified customers

See financing options

Ready to start your Town 'n' Country project?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate